Martinsound Martech Modular Studio Series, Owner'S Manual, Page: 15 / 28

9
In this example the MSS-10 is placed in
the control room next to the engineer.
Mic Preamp In:
Connect to the microphone
Line Out:
Connect to the recorder
Line:
Deselect to switch the line driver input
to the microphone preamplifier
Cal:
Select to use the VU to set Mic Gain
Mic Gain:
Rotate switch to select optimal gain
–20:
Select if lowest Mic Gain position pro-
vides too much gain, then set Mic Gain
Cal:
Deselect to use the Line Out control
Line Out:
Set and ride the line driver output level
Mute:
Select to mute the line driver output
This configuration gives the engineer the
ability to optimize gain, set and ride level,
mute the audio, and meter the level during
the record process. It works well for track-
ing and overdub sessions, or recordings
where a single microphone is recorded to
a track.
This method maintains the highest qual-
ity audio signal from the microphone to
the recorder.
The Minimalist Approach
Getting The Most Out Of Your MSS-10