© Martin Engineering GmbH
18
M3504UK-10/15
Installation
5.2.5
Adjust the primary cleaner parallel to the conveyor belt
Measure the distance on both sides between the scraper blade and
the head drum. To do this, place the scraper blade against the con-
veyor belt. The measurements on both sides must be equal.
5.2.6
Levelling the primary cleaner
Level the primary cleaner shaft to the head drum or check that the
scraper blade is positioned evenly against the conveyor belt.
Once all the measurements are correct and the primary cleaner is
adjusted it can then be fixed in position; if not, it should be reinstalled
or re-positioned.
Fig. 6: Adjust the primary cleaner shaft parallel to the head drum
(example)
Fig. 7: Levelling the primary cleaner shaft (example)
B
A = B
B
A
A
A = B
A
B
A = B