background image

Specifications

23

Specifications

Physical

Length  . . . . . . . . . . . . . . . . . . . . . . . . . 164 mm (6.5 in.) including mounting ears
Width  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  68 mm (2.7 in.)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  36 mm (1.4 in.)

Control and Programming

Control options . . . . . . . . . . . . . . . . . . .Martin P3™ System Controller via Martin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3 PowerPort 1500™ and/or DMX

Protocol detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Automatic
Product detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Automatic
Control modes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adapts to detected product
DMX channels  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adapts to detected product
Setting and addressing. . . . . . P3 System controller or RDM-compliant controller
DMX compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USITT DMX512-A
RDM compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ANSI/ESTA E1.20
P3 compliance . . . . . . . . . . . . . . . . . Martin™ proprietary P3 video data protocol
Firmware update  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Via P3 System Controller

Control/User Interface

Device status  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Multicolor status LED
Device test and reset .  Pushbutton to call up local test patterns and reset device

Video Processing

Brightness control
Gamma correction and control
Color temperature control
Calibration processing
Synchronization

Construction

Housing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Extruded aluminum
Protection rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IP65

Installation

Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Any 
Surface mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two M6 mounting slots
Truss mounting . . . . . . . . . . . . . . . M12 mounting hole for standard rigging clamp

Connections

48 VDC power and data input  . . . . . . . 6-pin male custom connector, IP65-rated
48 VDC power and data throughput. .6-pin female custom connector, IP65-rated
15 VDC power and data output  . . . . .8-pin female custom connector, IP65-rated

www.audiovias.com

Summary of Contents for VC-Feeder





























Reviews: