Service
21
Service
Warning! There are no user-serviceable parts inside the VC-
Feeder™. Refer any service operation not described in this guide to
Martin Professional or its authorized service agents.
Installation, on-site service and maintenance can be provided worldwide
by the Martin Professional Global Service organization and its approved
agents, giving owners access to Martin’s expertise and product
knowledge in a partnership that will ensure the highest level of
performance throughout the product’s lifetime. Please contact your Martin
supplier for details.
The only service operation the user can carry out on the VC-Feeder™ is
occasional cleaning and uploading software, if this should ever be
necessary.
Cleaning
Warning! Do not immerse the VC-Feeder™ or expose it to high-
pressure water jets.
Do not use abrasive, caustic or solvent-based products for cleaning, as
they can encourage corrosion and cause surface damage.
To clean a VC-Feeder™:
1. Disconnect the installation from power.
2. Clean the outside of the device with a soft cloth dampened in a warm
water/detergent solution.
Software installation
It may be necessary to upload new software (i.e. firmware) to a VC-
Feeder™ if you believe that the product has a software-related fault or if
you want to update to a newer version. Software updates are available
from the Martin website (http://www.martin.com) and can be installed from
the P3 system controller.
www.audiovias.com
Summary of Contents for VC-Feeder
Page 1: ...VC Feeder User Manual www audiovias com...
Page 27: ...www audiovias com...
