![background image](http://html1.mh-extra.com/html/martin/trackpod/trackpod_getting-started_1732542032.webp)
Page 32
Getting Started
Risers - If the stage has ramps or platforms you may use the “riser tool”
to define their location, inclination, size and height. When the TrackPod
is pointed at a defined riser it will automatically add the target height to
the height of the ramp or platform so the performers are still properly lit
while on the riser.
Megapod - If you have two TrackPods you may combine them to give
you a true 3D point by asking both operators to point at the same
performer. This is useful in shows with flying performers or where the
target height is constantly changing and cannot be approximated with
manual control. To enable the megapod, go to the preferences screen
Stage
Stage
Target height = 1.5m
Target height = 0.3m
FIGURE 11 - Target height explained. The TrackPod is pointing at both the
actor and the dog but the followspot is directed at the actor if the target
height is set to 1.5 m and at the dog if the target height is set to 0.3 m.
www.audiovias.com