Martin RUSH Scanner 1 LED, User Manual, Page: 24 / 48

24 RUSH™ Scanner 1 LED User Manual
3. Press ENTER to confirm your selection.
Pan/tilt inversion
The PAN INVERSE and TILT INVERSE menus can be used to reverse the
direction of pan and tilt. These settings are useful for symmetrical effects with
multiple fixtures, or when coordinating the movement of fixtures that are floor
mounted and rigged upside down.
To adjust the pan or tilt inversion settings:
1. Select PAN INVERSE or TILT INVERSE and press ENTER.
2. Select the YES to reverse pan or tilt control or NO for normal control.
3. Press ENTER to confirm your selection.
Calibration settings
Dimmer calibration
You can use dimmer calibration to set the maximum light output level during
standalone operation or to match output levels across multiple fixtures. To set
dimmer calibration:
1. Power the fixture on (if matching multiple fixtures, aim them so that their
projections are side-by-side).
2. Select DIMMER CALIBRATE and press ENTER.
3. Using the DOWN and UP buttons, change the value from 50 …100 to
adjust the maximum light level.
4. Press ENTER to confirm the maximum light level.
Effect home position adjustment
The effects (pan, tilt, color wheels, gobo wheels, gobos, focus, and prism) can
lose their indexed home position. To reset any of these:
1. In the menu structure, press and hold ENTER for at least 3 seconds to
enter the OFFSET MENU (see’
Offset adjustment
’ on page 37).
2. Use the DOWN and UP buttons to scroll to the effect you want to adjust.
Press ENTER to select it.
3. Use the DOWN and UP buttons to adjust, then press ENTER to set (or
press MENU to exit without making a change).
Service functions
Auto test
To perform a complete test of all of the fixture functions:
1. Select AUTO TEST and press ENTER.
2. Press ENTER again. The fixture will run a self-test routine.