Martin Mania DC2, User Manual

Page: 8 / 24

8 Mania DC2 user manual
I n s t a l l i n g a p l u g o n t h e m a i n s l e a d
Warning! For protection from dangerous electric shock, the fixture must
be grounded (earthed). The AC mains supply shall have
overload and ground-fault protection.
Important! Verify that the feed cables are undamaged and rated for the
current requirements of all connected devices before use.
The fixture’s mains lead may require a grounding-type cord cap that fits
your power distribution cable or outlet. Consult a qualified electrician if you
have any doubts about proper installation.
Following the cord cap manufacturer’s instructions, connect the
appropriate wires to ground (earth), live, and neutral. The following table
below shows some common wire identification schemes.
Applying power
1 Connect the mains power cable to the fixture at the 3-prong IEC male
input socket on top of the fixture.
2 Turn the power on using the power-on switch.
Function Wire (EU) Wire (US)
live brown black
neutral blue white
ground yellow/green green
Mains socket
Power on switch