Martin Mania DC2, User Manual

Page: 11 / 24

Installation 11
3 Slide the fixture cover open
as far as possible (there is a
physical stop point that
prevents access to the
power supply section).
4 The gobo can be found
close to the lamp. Remove the
gobo from its holder. We
recommend that you carefully
press the gobo out from the lamp
side using a flat-head screwdriver
and then grasp it with a pair of
needle-nose pliers from the other
side to remove it.
5 Change the orientation of the
gobo and return it to the holder.
Note that the painted black side
of the gobo should always face
away from the lamp.
6 The color filter is located just
behind the lens. Remove the filter
from its holder, turn it upside
down and replace it.
7 Close the fixture cover and
tighten the thumb screw, taking
care not to trap any loose wires.