MAC 700 Wash Spill Limiter Kit Installation Guide – Page 12 of 13
28. See Figure 23. Inserting 3 x
spacers (P/N 08261011),
install the remaining three of
the ten male/female pillars
(P/N 08053814) supplied in
the kit, using a 5.5 mm
open-ended wrench to hold
the pillars on the other side of
the spill limiter plate.
29. See Figure 24. Fasten the
new color wheel onto its
flange in any position where
the screw holes line up using
four M4 x 10 Taptite screws.
Do not damage the filters
while applying force to cut
the threads in the color wheel
flange.
Figure 23
Figure 24