MAC 700 Wash Spill Limiter Kit Installation Guide – Page 2 of 13
Overview
The MAC 700 Wash Spill Limiter Kit contains the following items:
Tools required
Screw sizes given in this guide are indicative only.
The following tools are normally required to install the Spill Limiter Kit in a MAC 700 Wash as described
in this guide. However, if screws have been replaced during service, for example, you may find that other
tools are required.
• 5.5 mm open-ended hex wrench
• Torx TX10 and TX20 screwdrivers
A
B
C
D
E
F
G
H
I
J
Table 1
A
1 x spill light cover plate. . . . . . . . . . . . P/N 23819270
B
1 x outer aperture plate . . . . . . . . . . . . P/N 62409070
C 1 x Color wheel w/o filters . . . . . . . . . . P/N 62326075
D 1 x spacer, ø3,2/ø6x3 brass . . . . . . . . P/N 08261011
E
1 x M3 x 6 Torx screw . . . . . . . . . . . . . P/N 08050702
F
1
x M3 x 20 standoff pillars f7/f7 . . . . . P/N 08053856
G 10 x M3 x 20 standoff pillars m6/f7 . . . P/N 08053814
H 4 x M4 x 10 Torx Taptite screws . . . . . . P/N 08070701
I
1 x spacer, ø3.2/ø6x2 brass . . . . . . . . . P/N 08261000
J
1 x color wheel shutter . . . . . . . . . . . . . P/N 62327266
Parts list