DMX protocols
33
8
16
0 - 9
10 - 14
15 - 19
20 - 24
25 - 29
30 - 34
35 - 39
40 - 44
45 - 49
50 - 54
55 - 59
60 - 64
65 - 69
70 - 74
75 - 79
80 - 84
85 - 89
90 - 94
95 - 99
100 - 104
105 - 109
110 - 114
115 - 119
120 - 124
125 - 129
130 - 249
250 - 255
0 - 1
2 - 3
4 - 5
6 - 7
8 - 9
10 - 11
12 - 13
14 - 15
16 - 17
18 - 19
20 - 21
22 - 23
24 - 25
26 - 27
28 - 29
30 - 31
32 - 33
34 - 35
36 - 37
38 - 39
40 - 41
42 - 43
44 - 45
46 - 47
48 - 49
50 - 97
98 - 100
Fixture control
3
No function
Reset Entire fixture1
No function
Reset Effects only1
No function
Reset Pan & Tilt Only1
No function
PTSP = NORM
2
PTSP = FAST
2
No function
Reserved for Future Use
No function
Fan Mode - Full
2
No function
Fan Mode - Regulated
2
No function
Fan Mode - Silent
2
No function
Dimmer Curve = LIN
2
No function
Dimmer Curve = SQR
2
No function
Dimmer Curve = ISQR
2
No function
Dimmer Curve = SCUR
2
No function, reserved for future use
Illuminate Display
Snap
0
9
17
Channel not used
The
PGRP
option in the control menu for the module defines which LEDs the following 4 channels
control. See “Pixel grouping” on page 13. The channels can control:
• All of the LEDs (
PGRP
set to “
ALL
”), or
• Group A of 2 vertically split LED groups (
PGRP
set to “
2V
” and four other channels control the
opposite segment), or
• Group A of 2 horizontally split LED groups (
PGRP
set to “
2H
” and four other channels control the
opposite segment), or
• Group A of 4 quadrant split LED groups (
PGRP
set to “
1
” and three groups of four other channels
control the other three segments).
10
18
0 - 255
0 - 100
Warm white – raw
CTC channel must be set to a DMX value from 0 - 19.
Zero
→
100%
Fade
0
11
19
Channel not used
12
20
0 - 255
0 - 100
Cold white – raw
CTC channel must be set to a DMX value from 0 - 9.
Zero
→
100%
Fade
0
13
21
0 - 19
20 - 255
0 - 7
8 - 100
CTC (Color Temperature Control) – calibrated
No function, Warm and Cold channels (10 and 12 in CT
mode/18 and 20 in CTX mode) enabled
CTC 7 000 K
→
3 000 K, Warm and Cold channels disabled
Fade
0
The following block of four channels is only available and used if individual quarter or half
groups of LEDs are to be controlled. The level of control is set using the
PGRP
option in
the control menu for the module. See “Pixel grouping” on page 13. When available, the
channels control:
• Group B of 2 vertically split LED groups (
PGRP
set to “
2V
”), or
• Group B of 2 horizontally split LED groups (
PGRP
set to “
2H
”), or
• Group B of 4 quadrant split LED groups (
PGRP
set to “
1
”).
14
22
0 - 255
0 - 100
Warm white – raw
CTC channel must be set to a DMX value from 0 - 19.
Zero
→
100%
Fade
0
15
23
Channel not used
16
24
0 - 255
0 - 100
Cold white – raw
CTC channel must be set to a DMX value from 0 - 9.
Zero
→
100%
Fade
0
CT
CTX
DMX Value
Percent
Function
Snap/
fad
e
De
fault
DMX
v
a
lue
Table 5: DMX Protocol, CT Zoom module
