![background image](http://html1.mh-extra.com/html/martin/jem-hazer-pro/jem-hazer-pro_user-manual_1732682013.webp)
Control
settings
13
Control settings
Overvi ew
The digital display in the centre of the top panel allows you to configure the
machine using option menus.
The brightness of the display can be changed to LOW, NORM or HIGH using the
DISP menu option.
Qui ck access buttons
The four quick access buttons below the display allow you to quickly set the
machine to one of two haze output levels, and engage silent mode or continuous
run mode. The display shows the current setting.
The two left hand buttons select preset combinations of haze and fan.
quick mode
haze and fan settings
Haze 35%, Fan 15%
Haze 75%, Fan 45%
The two right hand buttons change the operating mode.
Press RUN to turn on haze in continuous run mode. The display shows
.
To stop the haze, press the Run button again to set the machine to Standby
mode (heaters remain on).
Press SILENT to engage a low noise mode which slows down the fan. If the RUN
button is used to stop the haze, Silent mode is not cancelled. Silent mode is a
global setting and will affect both manual and DMX control.
To change the preset settings, adjust the Fan and Haze settings
using the menu, then within 3 seconds press the Pre1/Pre2 button
to store the settings.
will then be displayed if successful.
Menu previous/next
buttons
Value down/up
buttons
Digital display
Enter/store button
Quick access buttons
PRE1 PRE2 SILENT RUN