16
Mania EFX500 & EFX600 user manual
Setting up synch roni zed operation
To set up Mania EFN fixtures for synchroniQed operation:
H. Ensure that all fixtures on the data link are in DMN mode.
2. Select one fixture to be the master and set it to auto trig or music trig
mode Rsee d
3+&+4$'"()56.7)18#'4)$9'():9)%8$:)$9'():2+9%$'"()1:;+#
e on
page H5S
3. When a slave fixture receives signals from the master, it will
automatically begin operating in slave mode.
#!"
will appear in its
display and the green Data LED will light to show that the fixture is
receiving control data.
Fixtures return to their DMN5auto trig5music trig settings when powered off
and on, so you should only need to set fixtures as masters5slaves once.
D M X c o n t r o l l e r o p e r a t i o n
S et tin g DMX mo de 1 or 2
Two DMN modes are available: DMN mode H RnormalS and DMN mode 2
RextendedS. Mode 2 uses two extra DMN channels that allow you to select
pre-programmed macros and set the speed of effects movement from the
DMN controller. The fixture is supplied set to DMN mode 2.
U The Mania EFN500 uses seven DMN channels in DMN mode H and nine
channels in DMN mode 2.
U The Mania EFN600 uses six DMN channels in DMN mode H and eight
channels in DMN mode 2.
X100
X10
X1
Mode
DMX Address
Data LED lit
Slave mode
[Mode] button