Martin Easypix 1200, User Manual, Page: 5 / 44

PROTECTION FROM INJURY
•
Do not look at LEDs with a magnifying glass or any other optical
instrument that may concentrate the light output.
•
Ensure that all external covers, components and installation fittings
are securely fastened.
•
Block access below the work area and work from a stable platform
whenever installing, servicing or moving the devices.
•
Ensure that all supporting structures, surfaces, fasteners and lifting
equipment can bear the weight of all the devices they are intended to
support plus an adequate safety margin, and that they conform to
local building and safety regulations.
•
Use a sufficient number of fasteners with sufficient corrosion
resistance, dimensions and strength to mount the DIN rail safely. Any
nuts used must be self-locking.
•
If the Easypix Power or luminaires are to be installed in a location
where injury or damage may be caused if a device falls, use a
secondary means of attachment such as safety wires looped tightly
around the devices and anchored securely to the mounting structure
or in the mounting surface.
Disposing of this product
Martin™ products are supplied in compliance with Directive
2002/96/EC of the European Parliament and of the Council of
the European Union on WEEE (Waste Electrical and Electronic
Equipment), as amended by Directive 2003/108/EC, where
applicable.
Help preserve the environment! Ensure that this product is
recycled at the end of its life. Your supplier can give details of
local arrangements for the disposal of Martin products.