Martin Easypix 1200, User Manual, Page: 15 / 44

15
3. Rotate the locking knob counter-clockwise until it engages in the
luminaire profile and locks it in position.
Figure 5: Releasing and tighten the tilt locking lock
Mounting the Easypix Power
Fasten the Easypix Power securely to a flat surface in a location that is
accessible for service. To mount it, use M5 screws in the four mounting
holes. Respect all local safety, fire and building regulations governing
the installation of electrical equipment in cavities or plenums. Allow free
airflow and at least 5 cm (2 in.) of free space around the device. Allow
sufficient ventilation to ensure that the ambient temperature will not
exceed 40° C (104° F).
When choosing a location for the Easypix Power, bear in mind that
access to the DIP switch is required if you need to change the DMX
address or to change stand-alone programs.