Martin Easypix 1200, User Manual, Page: 18 / 44

18 Easypix user manual
Connecting to power
The Easypix Power is supplied with an IEC power cable ready for
connection to a single-phase 3-wire (live, neutral, ground/earth) power
distribution system at 100-120/200-240 VAC nominal, 50/60 Hz.
Details of standard US and EU conductor identification systems are
given in Table 1.
Wire color
(US system)
Wire color
(EU system) Conductor Symbol Screw (US)
black brown live L yellow or
brass
white blue neutral N silver
green yellow/green ground
(earth) green
Table 1: Conductor identification
Important! Check that all installation work is completed and carry
out appropriate tests and safety checks before applying power.
Power plug
If you decide to fit the supplied power cable tail with a plug that is
suitable for your AC mains power outlets, install a grounding-type
(earthed) plug that is rated 5 A minimum, following the plug
manufacturer’s instructions.
Table 1 shows some possible pin identification schemes; if pins are not
clearly identified, or if you have any doubts about proper installation,
consult a qualified electrician.