Martin Engineering M3687-12/17
8
Martin
®
DT2S Reversing Cleaner
Figure 3. Chute Cutout Detail
Marking Chute
Cutouts
1. Using the previously marked line as the centerline, mark the chute cutout
and mount hole locations as shown in Figure 3. Repeat on both sides of
chute, ensuring the cutouts are accurately aligned with each other.
NOTE
The mount hole dimension below the belt differs for air- or
spring-tensioned models. Make sure that you are using correct
dimensions and verify cleaner position before proceeding.
5.00
(127)
7.00
(178)
4.50
(114)
4.50
(114)
8.67
(220)
Air Tensioner
5.00
(127)
7.00
(178)
10.00
(254)
6.00
(152)
4.50
(114)
Bottom Mount Spring Tensioner
Tensioner Bracket Mounting Holes = 9/16 in. (14 mm) dia.
5.00
(127)
7.00
(178)
4.50
(114)
2.75
(70)
Top Mount Spring Tensioner
10.00
(254)
2.56
(65)
2.56
(65)
2.47
(63)
Installation