![background image](http://html1.mh-extra.com/html/martin/dmx-controller-2518/dmx-controller-2518_user-manual_1732563018.webp)
15
Operation
at scene 2.
A u t o Tr i g g e r E x e c u t i o n
1.
Set the trigger rate: Press [Auto] once to start tim-
ing, wait for the desired trigger interval, and then
press [Auto] again to stop timing.
2.
The scenes execute sequentially. The timer LED
blinks to indicate scene changes as the controller
steps through the bank.
3.
Exit: Press [Auto] again to exit auto trigger mode.
M u s i c Tr i g g e r E x e c u t i o n
1.
Start execution: Press [Music]; the Music Trig LED
lights. The controller runs the scenes to the beat of
the music.
2.
Exit: Press [Music] again.
S e l e c t i n g a M I D I Tr i g g e r
Note: A MIDI code may be used either as a trigger or to execute a MIDI scene, but not both.
1.
Press [Midi]. The display flashes.
2.
Press [Auto].
3.
(Optional) Select a MIDI channel: Press the up
and down arrow buttons to select a channel
between 1 and 16.
4.
Generate the MIDI code: On you keyboard or
other MIDI device, play the note or execute the
function to use as a trigger.
5.
Repeat steps 1 - 4 to select additional MIDI codes as desired. Up to 2048
MIDI codes may be selected.
6.
See “Deleting a MIDI Scene or Trigger” on page 13 to delete a trigger.
M I D I Tr i g g e r E x e c u t i o n
1.
Generate the MIDI code. The scene changes each
time a MIDI trigger is generated.
2.
MIDI triggers remain active until deleted.
Auto
Auto
Music
Midi
Auto
Scene Bank
2518 IV.BOOK Page 15 Tuesday, September 22, 1998 7:10 PM