12
2518 DMX Controller
S a v i n g a S c e n e
1.
Press [Store]. The display flashes.
2.
Select a bank in which to save the scene: If you
want to save the scene in a different bank, press
the up and down arrow buttons to switch banks.
The active bank is displayed as a 2-digit number.
3.
Select the scene to save: Press one of the 6
scene buttons. The active scene is displayed as a
1-digit number. The scene is saved when the dis-
play stops flashing.
E d i t i n g a S c e n e
1.
Select the scene to edit.
2.
Make the desired changes.
3.
Save the edited scene as described above.
C o p y i n g a S c e n e
If you want to use the settings from one scene as the starting point for another scene, you
may copy the scene and edit it.
1.
Select the scene to be copied.
2.
Make the desired changes.
3.
Save the new scene as described above.
D e l e t i n g a S c e n e
Deleting a scene is not necessary before saving a new one. It may be useful, though, if you
want a fresh start. Deleting a scene is a matter of creating and saving a scene in which all
DMX values are 0.
1.
Deactivate all channels.
2.
Slide all faders to 10.
3.
Activate all channels.
4.
Slide all faders to 0.
5.
Press [Store].
6.
Press the scene button to be deleted.
Store
Scene Bank
1
2518 IV.BOOK Page 12 Tuesday, September 22, 1998 7:10 PM
