Operation
19
Operation
Status LEDs
Operation can be monitored using the status LEDs on the front of the
Martin Splitters:
Martin DMX 5.3 Splitter
Martin RDM 5.5 Splitter
The
power
LED lights if AC mains power is applied and the
Splitter’s power supply unit is working.
The
signal
LED on the front panel lights green if a valid data
signal is present at the
in
socket.
The
err
(error) LED lights red if a signal present at the
in
socket
is faulty.
The LED under the termination button lights if the Splitter’s
internal DMX termination is activated.
The
power
LED lights if AC mains power is applied and the
Splitter’s power supply unit is working.
The
signal
LED on the front panel lights green if a valid signal
is present at the
in
socket and red if a faulty signal is present at
the
in
socket.
The
rdm
LED lights if an RDM signal is present.
The LED under the termination button lights if the Splitter’s
internal DMX termination is activated.
The LED under the
dmx only
button lights if the DMX-only filter
is active (i.e. all non-DMX signals are removed from outputs 1 -
5).
The signal LED next to outputs 1 - 5 lights if a valid DMX or
RDM signal is present at that output socket.
Summary of Contents for DMX 5.3 Splitter
Page 1: ...Martin DMX 5 3 Splitter Martin RDM 5 5 Splitter user manual TM TM ...
Page 23: ...Block diagrams 23 Block diagrams Martin DMX 5 3 Splitter Martin RDM 5 5 Splitter ...
Page 27: ......
Page 28: ...www martin com Olof Palmes Allé 18 8200 Aarhus N Denmark Tel 45 8740 0000 Fax 45 8740 0010 ...
