Martin Professional MAC 2000 Profile II, User Manual

Page: 23 / 52

Optics 23
3 Remove the top cover of the fixture using a flathead screwdriver to unlock the four _uarter-turn screws.
4 Remove the two screws holding the color wheel module in place using a Philips screwdriver. Disconnect the
cables and lift the whole module out of the fixture.
5 Remove color wheel 2 using a Philips screwdriver.
6 Attach the dimmer wheel in place of the color wheel. Ensure that the indexing magnet on the wheel rim is
aligned with the sensor on the color wheel module.
The dimmer wheel will be automatically detected when the MAC 2000 Wash is powered on and7or reset.
When the dimmer wheel is installed, the DMT channel 2 ZIntensity[ must be maintained at -00p.
TO
P
TO
P
29 / 28 10 9
Cable connections