Martin Professional Ego X4, User Manual

Page: 25 / 44

Basic service 25
B
ASIC SERVICE
C L E A N I N G
Regular cleaning of the elements in the optical path, as well as the fan
and air vents, is vital to maintaining the operational quality of the Ego X
Series.
Important! Excessive dust, smoke fluid and particle buildup degrades
performance and causes overheating and damage to the
fixture that is not covered by the warranty.
C l e a n i n g t h e f a n a n d a i r v e n t s
To maintain adequate cooling, dust must be cleaned from the fan and air
vents periodically. Remove dust from the fan and air vents with a soft
brush, cotton swab, vacuum, or compressed air.
C l e a n i n g o p t i c a l c o m p o n e n t s
Clean the optical components regularly. The presence of smudges or dust
on optical surfaces can reduce the strength of the light output and the
quality of the effects.
Use care when cleaning optical components and work in a clean, well lit
area. The coated surfaces are fragile and easily scratched. Do not use
solvents that can damage plastic or painted surfaces.
1. Disconnect the fixture from power
and allow the components to cool for
at least 15 minutes.
2. Remove the front lens for cleaning by
grasping the lens collar, twisting it
clockwise , and sliding the lens out of
the fixture.
3. Remove the fixture cover if you need
to access the internal optical
components. It can be a good idea to