Martin Professional Ego X4, User Manual

Page: 27 / 44

Basic service 27
2. Remove the six access screws from the cover and lift it off.
3. If replacing a lamp, grasp the
old lamp by the reflector and
pull it out of the holder. Then
pull the socket off the lamp. Do
not pull the wires.
4. Push the socket fully onto the
pins of the new lamp.
5. Clean the glass bulb with the
cloth supplied with the lamp,
particularly if your fingers
touched the glass. A clean, lint-
free cloth wetted with alcohol
may also be used.
6. Gently push the lamp into the holder until it snaps into place.
7. Replace the fixture cover and tighten the access screws, taking care
not to trap any loose wires.
F U S E S
Ego X Series fixtures use a 3.15 Amp slow-blow fuse for protection
against current overload. An indication that the fuse may have blown is
that when power is applied the lamp does not light and the fan does not
operate.
If the fuse blows repeatedly, there is a fault with the unit that requires
service by a Martin technician.
Never bypass the fuse or replace it with one of another size or rating.
R e p l a c i n g t h e m a i n f u s e
1. Unplug the power cable from the power input socket. The fuse holder
is integrated into the power input socket.
2. Using a flathead screwdriver, lift the cover off the fuse holder and
replace the fuse.
3. Replace the fuse holder cover and reconnect power.