manualshive.com logo in svg

Martin Audio WPL, User Manual

Share
Download
Martin Audio WPL User Manual Download Page 22

Copyright © 2019 Martin Audio Ltd.

22

WPL USER GUIDE V1.0

WPL USER GUIDE

Sensor in position

The sensor is now ready for use (fig. 15). It is entirely passive so needs no power supply or batteries (the read-out display requires two PP3 
batteries). It can be connected to the read-out sensor with a standard 3-pin XLR mic cable of any length.

Martin Audio supply a cable designed specifically for use with the inclinometer system, part number PWA00057. This is a 35m cable using 
high grade AES spec microphone cable fitted with male and female Neutrik NC3XX-HD connectors which are extra rugged and have an IP 
rating of IP67 to enable use outdoors in all weather conditions.

Note that a single ASM20019 read-out display can be used with any number of sensors. It is not necessary to have the same number of 
displays as sensors. One display can be plugged into each inclinometer cable, one at a time to take a reading of the angle before entering 
the figure into the DISPLAY project.

fig. 15 

Summary of Contents for WPL

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands