Copyright © 2019 Martin Audio Ltd.
21
WPL USER GUIDE V1.0
WPL USER GUIDE
Using the PZ2 Pozidrive screwdriver, unscrew all four lid screws until the lid can be removed from the base of the box. Note that the screws
do not have to be completely removed from the lid, they can remain captive in the lid to prevent them getting lost.
Attach the box to the grid
Position the box on the outside of the bracket on the left side of the grid. There are two M4x20mm cap head screws supplied with the
sensor. These go through the holes in the bottom left and top right of the box into the threaded holes in the grid bracket. Tighten using an
M3 allen key to ensure a tight fit (fig. 13).
Re-fit the lid
The lid can be re-fitted, check that the gasket on the underside of the lid edge is intact to ensure that the lid is sealed once screwed in
position. Note that the design of the box is such that the mounting and lid screws are positioned outside the lid gasket to ensure that there
will be no moisture ingress through their holes. All screws are stainless steel to avoid corrosion when used outdoors (fig. 14).
fig. 13
fig. 14
