Martha Stewart MTS-MRM18 Operator'S Manual Download

Page: 3 / 12

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all

instructions on the machine before attempting to assemble and operate.

SAFETY ALERT –

Indicates a

precaution, a warning, or a danger.

DANGER!

Cutting/dismemberment

hazard – Keep feet away from the

rotating blades.

Keep bystanders and children a

safe distance away.

DANGER!

Sharp blades can

sever fingers and toes. Keep

away from the cutting area.

Slip on slope hazard –

Use extra

caution when mowing on slopes to

prevent slip and fall accidents.

CAUTION!

Beware of stones and

other foreign objects that could be

thrown from the appliance.

DANGER!

Cutting/dismemberment

hazard – Keep hands away from the

rotating blades.

Symbols

Descriptions

READ THE OPERATOR'S

MANUAL(S) –

Read, understand,

and follow all instructions in the

user manual(s) before attempting to

assemble and operate.

Summary of Contents for MTS-MRM18













Search results

Summary of Contents for MTS-MRM18

Reviews:

Related manuals for MTS-MRM18

Brands by name

Popular brands

Martha Stewart MTS-MRM18, Operator'S Manual

Search results

Summary of Contents for MTS-MRM18

Reviews:

Related manuals for MTS-MRM18

Brands by name

Popular brands