Martha Stewart MTS-MRM18 Operator'S Manual Download

Page: 5 / 12

Unpacking

Carton Contents:

•

Reel mower body with front wheels

•

Rear wheels (2)

•

Rear wheel bolt + washer (2)

• Allen wrench
•

Upper handle frame

•

Middle handle frame

•  Lower handle bar (2)
•  Handle shield
•  Handle shield knobs (4)
•  Handle shield bolts (4)
•  Manuals with registration card

Carefully remove the manual reel mower and check to see

that all of the above items are supplied.

Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you find damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

NOTE:

Do not discard the shipping carton and packaging

material until you are ready to use your new manual reel

mower. The packaging is made of recyclable materials.

Properly dispose of these materials in accordance with

local regulations.

IMPORTANT!

The equipment and packaging material are

not toys. Do not let children play with plastic bags, foils,

or small parts. These items can be swallowed and pose a

suffocation risk!

Assembly

Rear Wheel Assembly

Align one rear wheel with the hole on the end of the

mower body, and connect with one set of rear wheel

bolt, as shown (Fig. 1).

Use the supplied Allen wrench to secure the bolt (Fig. 2).

Repeat the above instructions for the other wheel.

Handle Assembly

Lay out the handle parts upside down as shown for easier

assembly. Make sure the arch of the upper handle frame

is pointing down. Enter the end of the upper handle frame

into the middle handle frame, and enter the end of the

middle handle frame into the lower handle bar. Roughly

align the holes (Fig. 3).

Fig. 1

Rear wheel

bolt + washer

Fig. 2

Rear wheel

Allen wrench

Upper handle frame

Lower

handle

bar

Fig. 3

Middle handle frame

Summary of Contents for MTS-MRM18













Search results

Summary of Contents for MTS-MRM18

Reviews:

Related manuals for MTS-MRM18

Brands by name

Popular brands

Martha Stewart MTS-MRM18, Operator'S Manual

Search results

Summary of Contents for MTS-MRM18

Reviews:

Related manuals for MTS-MRM18

Brands by name

Popular brands