Martello My Milky Pro, Instruction Manual

Page: 14 / 22

1
5
2
6
3
7
4
8
14 MyMilky
PRO
Plug in the unit.
Ensure the rubber seal is
in place and the whisk (I)
is inserted before placing
lid (G) onto the milk
container (A). Close both
levers (C) by pressing
down and pushing in.
Caution with overfilling
to avoid frother from
overflowing.
Error status: If the indicator
light (D) keeps flashing,
this means the machine
is overloaded with milk.
Pull out the power cable
and pour some of the milk
out until you get below
the MAX line, plug the unit
back in and try again.
Put the milk container (A)
onto the base (F).
Unplug the connection
plug.
Pour the milk into the
milk container (A). Pay
attention to the MAX
capacity lines.
Push the button (D) for
heating & frothing. The
indicator light (D) will
come on to indicate the
heater is on. After frothing
is completed, the indicator
light (D) will keep flashing
for an additional 30
seconds.
DAILY USE FROTHING & HEATING
EN
ERROR