Martello My Milky Pro, Instruction Manual

Page: 12 / 22

1
5
2
6
3
7
4
8
12 MyMilky
PRO
Plug in the unit.
Ensure the rubber seal is
in place and the whisk (I)
is inserted before placing
lid (G) onto the milk
container (A). Close both
levers (C) by pressing
down and pushing in.
Caution with overfilling
to avoid frother from
overflowing.
Error status: If the indicator
light (E) keeps flashing. The
machine is overloaded
with milk. Pull out the
power cable and pour
some of the milk out until
you get below the MAX
line, plug the unit back in
and try again.
Put the milk container (A)
onto the base (F).
Unplug the connection
plug.
Pour the milk into the
milk container (A). Pay
attention to the MAX
capacity lines.
Pour the cold milk into
the milk container (A)
and push the button for
cold frothing (E) then
the indicator light (E) will
turn on. After approx. 65
seconds the cold frothing
is complete. After cold
frothing is complete, the
indicator light (E) will keep
flashing for an additional
30 seconds.
DAILY USE - FROTHING COLD MILK
EN
ERROR