20
Figure 13. Connections for Outputting Thermocouples
4.8 Sourcing Thermocouples
To source a thermocouple use the following steps:
1.
Connect the thermocouple leads to the appropriate polarized TC miniplug, and insert the
plug into the TC terminals on the calibrator, as shown in Figure 13.
2.
Select lower display from the Main Menu, and choose thermocouple [TC] from the
primary parameters.
3.
Choose output [OUT] from the input/output control.
4.
Select the desired thermocouple type from the sensor types.
5.
Enter the temperature using the keypad.
Figure 14. Connections for Outputting RTDs
www.
GlobalTestSupply
.com
Find Quality Products Online at: