Marta MT-4309, User Manual

Page: 37 / 85

37

When cooking is over please unplug the appliance. You must cut pressure inside the multicooker down. Open the steam relief valve. Hot steam goes out and pressure inside becomes lower (pic 7).
CAUTION: Be really careful
–
steam is extremely hot! When pressure inside the multicooker becomes lower, then there is no outgoing steam from steam release opening, and float valve goes
down to the lowest position. Then open the lid. Never open the lid by force.
Please find recommended by our chef recipes for cooking with different automatic programs in our recipe book.
Cooking suggestions and requirements:
Weight of product you see in our recipe book is weight of clean, peeled, defrosted and chopped product. If you want to change our recipe please follow products
proportions, otherwise a dish could be burnt or it could boil away. Please mind to check and correct time or change cooking program in that case. Some other objective reasons could affect cooking time. They
КrО rОРТШЧ аСОrО вШЮ lТЯО, ЩrШНЮМЭ’Ь ЩlКМО ШП ШrТРТЧ, ЬЭШrКРО ЭТЦО КЧН ЭОЦЩОrКЭЮrО ШП ЩrШНЮМЭ. PlОКЬО ЦТЧН ЭСКЭ аrТЭЭОЧ МШШФТ
ng time is recommended and may vary. The recipe book is just our recommendation
and advice.
CHEF PRO
–
TEMPERATURE AND TIME ADJUSTMENT, MANUAL SET UP AND SAVE FOR FURTHER USE (IN
«
/MULTICOOK
», «
/CHEF
»
PROGRAMS AND IN REQUIRED AUTOMATIC PROGRAM)
COOKING WITHOUT PRESSURE (MULTICOOKER MODE)
You could change time and temperature settings before cooking process start and while cooking program is running (in cooking programs without pressure). They are
« /Frб», « /CЙУН»,
« /SФЧЯ ЫЬНЯ», «
/
/JЙХ», «
/
/БЧПРЭrЬ/DЧЭПР»
. You could set up your cooking time and temperature settings in
« /MЭФЬСЛЧЧУ»
program as well.
Change default settings before cooking program start (without pressure)

Choose cooking program with button . If you need
« /MЭФЬСЛЧЧУ»
choose it the same way.

The display shows preset time (for
« /MЭФЬСЛЧЧУ»
it is 10 minutes).

Press button of time and temperature settings . Then you see flashing time adjustment indication and flashing hour meaning on the display . You could set up hours with buttons
(up) and (down). Hour range is from 0 to 24 hours. Interval is 1 hour. If you keep button or pressed, then hours scroll faster.

For minutes set up press button shortly again and you see flashing time adjustment indication and flashing minute meaning on the display . You could set up minutes with buttons
(up) and (down). Minute range is from 0 to 59 minutes. Interval is 1 minute. If you keep button or pressed, then minutes scroll faster.