9
•
Hold the comb parallel to the head and slowly move the clipper through the hair as shown (fig. 8).
•
Cut the hair against the direction of their growth from the front to the top of the head. Then cut the side parts of the head.
•
For “flat top” use the flat comb, not attachments. Starts to cut from the top of the head lifting hair with the comb.
•
Using lower blade adjustment levels or smaller attachment combs cut hair to taper the hair down to the neckline.
BLADES ALIGNMENT
•
Blades must be realigned if they have been removed for cleaning or replacement.
•
To realign the blades simply match the upper and bottom blades teeth up, point for point.
•
End of top blade teeth should be approximately 1.2 mm back from bottom blade. Compare your clipper blades with the figure.
•
If blades are set incorrectly, add few drops of oil to the blades, switch on the clipper for a few seconds, then switch it off and unplug.
•
Loosen screws slightly and adjust the blades. Tighten screws after blade is aligned.
•
If the hair clipper buzzes, then adjust it using the screws (on the device). Before adjusting oil the blades.
CLEANING
•
Mind to clean the appliance regularly for appliance and blades long life.
•
Ensure that the appliance is switched off.
•
Remove cut hair from the blades with the brush.
•
Wipe the body of the hair clipper with wet cloth. Dry the appliance.
•
Don’t immerse the appliance in water or another liquid.
•
Don’t use chemical or abrasive cleaners.
BLADES LUBRICATION
•
Mind to oil the blades of the clipper every few haircuts for appliance and blades long life.
•
Use only oil that is in set.
SPECIFICATION
Model
Power supply
Power
Net weight / Gross
weight
Package size (L х W х H)
Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
Made in China
MT-2220
230 V, 50 Hz
15 W
0,32 kg / 0,40 kg
100 mm х 65 mm х 236 mm
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
Current information about service centers is available on the website http://multimarta.com
