9
BLADES ALIGNMENT
Blades must be realigned if they have been removed for cleaning or replacement.
To realign the blades simply match the upper and bottom blades teeth up, point for point.
End of top blade teeth should be approximately 1.2 mm back from bottom blade. Compare your clipper blades with the figure.
If blades are set incorrectly, add few drops of oil to the blades, switch on the clipper for a few seconds, then switch it off and unplug.
Loosen screws slightly and adjust the blades. Tighten screws after blade is aligned.
If the hair clipper buzzes, then adjust it using the screws (on the device). Before adjusting oil the blades.
CLEANING
Mind to clean the appliance regularly for appliance and blades long life.
Ensure that the appliance is switched off.
Remove cut hair from the blades with the brush.
Wipe the body of the hair clipper with wet cloth. Dry the appliance.
Don’t immerse the appliance in water or another liquid.
Don’t use chemical or abrasive cleaners.
BLADES LUBRICATION
Mind to oil the blades of the clipper every few haircuts for appliance and blades long life.
Use only oil that is in set.
SPECIFICATION
Model
Power supply
Power
Net weight / Gross
weight
Package size (L х W х H)
Producer:
NINGBO RIWEI ELECTRICAL APPLIANCES CO., LTD
ZHOUXIANG TOWN, INDUSTRIAL DEVELOPING ZONE, CIXI, 315324, ZHEJIANG, CHINA
Made in China
MT-2215
MT-2216
MT-2217
220-240 V, 50 Hz
15 W
0,32 kg / 0,40 kg
100 mm х 65 mm х 236 mm
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
UKR ПОСІБНИК З ЕКСПЛУАТАЦІЇ
ЗАХОДИ БЕЗПЕКИ
Уважно прочитайте дану інструкцію перед експлуатацією приладу і збережіть її для довідок надалі.
Перед першим включенням перевірте, чи відповідають технічні характеристики виробу, зазначені в маркованні, електроживленню у Вашій локальній мережі.
Використовуйте тільки в побутових цілях. Прилад не призначений для промислового застосування.
Не використовуйте поза приміщеннями.
Не залишайте працюючий прилад без догляду.
Не використовуйте прилад з пошкодженим мережним шнуром або іншими пошкодженнями.
