12 of 18
WS1213
ASSEMBLY GUIDE - ATTACH DRUM
8.
Connect drum to output drive shaft (align drum over set screw)
Hardware required: SET 5
Align set screw using a standard screwdriver, perpendicular
to mixer frame.
See Inset A
Drum will straddle set screw and fit tightly on motor
spindle.
Two washers placed on bottom of drum, secured with bolt.
Use a 22mm socket to tighten drum to motor spindle.
NOTE:
Assembly is easier with frame laying flat as shown.
Inset A
Go
to
Discount-Equipment.com
to
order
your
parts
