Marshall Electronics VS-101-HDSDI, User Manual

Page: 13 / 68

13
IP Server Instruction Manual
Connecting Power
After confirming the power source, connect power adaptor and connect the 12VDC connector to the
VS-101-HDSDI. The system will begin to boot up to the operating mode.
Check if it Works
Once the power is supplied to the server, it will start booting. The system will boot up to an operating
mode after approximately 40-60 seconds. The green LED on the Ethernet port will flash indicating the
system is ready.
Software provided on the disc called True Manager allows you to check the IP address and other
network details of the server. Please refer to the True Manager manual for instructions on how to find
the IP address of the server and if required changing it.
■ Encoder LED Display
Above LED status shows that the server is connected but a decoder is not connected. Once the
encoder is connected to a decoder, color of “LINK” LED will turn into green color and “ DATA” LED will
blink as video and / or audio transmissions occur.
■ Decoder LED Display
Above LED status shows that the Decoder has started without connecting to an encoder. Once an
encoder is connected, the color of “LINK” LED will be turned to green and the “DATA” LED will blink
as video and / or audio data transmissions occur.
Installation
PWR STATUS LINK DATA
OFF OFF Red
Green
Blinking
PWR STATUS LINK DATA
OFF Red Green
Blinking