background image

32

Warranty

Marshall Electronics warranties to the first consumer that this QVW-2710 LCD monitor will, under normal use, be free from defects
in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This
warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of

purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above.
Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics.
Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. It is considered normal for a

minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing area. Marshall Electronics
reserves the option to refuse service for display pixel failure if deemed unobtrusive to effective use of the monitor by our
technicians. No sales personnel of the seller or any other person is authorized to make any warranties other than those described
above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above. Due

to constant effort to improve products and product features, specifications may change without notice.

Marshall Electronics

Model No.

QVW-2710

27” Quad-Viewer Monitor with 4K Format Support

Operating Instructions

Summary of Contents for QVW-2710

















Reviews: