OWNER’S MANUAL
MODEL HST13 – AUTOTOAST™ VERTICAL TOASTER
135168CH7 RV042910
4
Copyright
©
2010 Marshall Air Systems, Inc.
All Rights Reserved.
3. Remove the front and back covers (Figure 3,4), by lifting these covers off the toaster. Clean these
covers with soap and water. Wipe the exposed metal parts with a damp soft cloth or towel.
4. Reconnect the power cord.
5. Clean belts according to the Belt Cleaning Procedures below. Do not scrub belts with abrasive
material.
6. Install the front and rear covers.
WEEKLY BELT CLEANING INSTRUCTIONS
NOTE: TOASTER BELTS MUST BE CLEANED WHILE TOASTER IS AT OPERATING
TEMPERATURE.
Supplies Needed:
Cleaning Agent: Scotch-Brite™ Quick Clean Griddle Liquid #700-40.
Contact a Marshall parts distributor or your restaurant
supplies dealer to get these products.
Cleaning Pad: Scotch-Brite™ All Purpose Scouring Pad #9488R.
Contact a Marshall parts distributor or your restaurant
supplies dealer to get these products
SEE FIGURE #14 FOR BELT CLEANING INSTRUCTIONS.
MONTHLY:
1. Perform Daily and Weekly Maintenance.
2. Replace any worn out toaster platen sheets or conveyor belts with Marshall parts. USE ONLY
MARSHALL APPROVED PLATEN SHEETS OR TOASTER WARRANTY IS VOID.
QUARTERLY:
1. Inspect motor brushes on variable speed models. If ¼” in length or less, replace with new.
2. Lubricate the drive chain with drops of any grade motor or machine oil.
TROUBLE SHOOTING GUIDE
NOTE:
SERVICE MUST BE PERFORMED BY A QUALIFIED SERVICE COMPANY. THE
TERM "QUALIFIED SERVICE COMPANY" MEANS ANY INDIVIDUAL, FIRM,
CORPORATION OR COMPANY WHICH IS EITHER ENGAGED IN AND IS
RESPONSIBLE FOR THE INSTALLATION OR REPLACEMENT OF ELECTRICAL
COMPONENTS, OR THE CONNECTION, INSTALLATION OR REPAIR OF
ELECTRICAL APPLIANCES, WHO IS EXPERIENCED IN SUCH WORK, FAMILIAR
WITH ALL PRECAUTIONS REQUIRED, AND HAS COMPLIED WITH ALL THE
REQUIREMENTS OF THE AUTHORITY HAVING JURISDICTION.
