WEEKLY BELT CLEANING INSTRUCTIONS
AUTOTOAST
™
MODEL HST13, HST13S
150986 RV032708
Copyright ©2008 Marshall Air Systems, Inc.
All Rights Reserved.
Pressing the ON/OFF button to start and
stop the belt, rotate the belt and clean the
next section. Repeat for both belts.
“Lo” will move belt.
“Hi” will stop belt.
5. Rotate Belt
USE GLOVES
Remove Bun Guide, Front and Rear Covers.
3. Bun Guide and Covers
USE GLOVES
After cleaning, reinstall Front and Rear Covers
and Bun Guide. Clean and save the All
Purpose Scouring Pad for the next belt
cleaning.
8. Bun Guide and Covers
USE GLOVES
3. Apply Cleaner to Pad
Apply Scotch-Brite™ Quick Clean Griddle
Liquid to the Scotch-Brite™ All Purpose
Scouring Pad
DO NOT POUR CLEANER ONTO BELT.
USE GLOVES
Remove Platen Sheet. Clean using current
procedures as described in the owner’s
manual. Reinstall when clean. If sheet has
cuts, holes or cannot be cleaned, replace with
a new sheet.
7. Platen Sheet
USE GLOVES
Turn power OFF (display should read “Hi”).
PUT ON HEAT RESISTANT GLOVES.
Belts are to be cleaned “in place” while
toaster is still at operating temperature.
2. Turn Unit OFF
Lightly rub width of the exposed belt in
circular motion.
4. Clean Belt
USE GLOVES
Rinse belt by wiping with a clean, damp,
sanitized towel. Frequently rinse towel to
remove accumulated soil and cleaner
residue.
6. Rinse Belt
USE GLOVES
Scotch-Brite™ Quick Clean Griddle Liquid
#700-40
Scotch-Brite™ All Purpose Scouring Pad
#9488R
Heat Resistant Gloves (Restaurant provided)
Clean Towel (Restaurant provided)
1. Supplies
To reorder weekly belt cleaning supplies, contact a Marshall Parts Distributor.
FIGURE 14
