Marshall Amplification APOLLO 8000, Calibration Manual, Page: 3 / 30

CONTENTS
Section Overview
1.1 The Factory Setup Screen 5
1.2 Control Channels 6
1.3 Data Entry 6
1.4 Calibration Menu Tree 7
Motor Valve Configuration
2.1 Machine options 9
2.2 PWM Valve/Motor Setup 9
2.2.1 Feedback 9
2.2.2 Response 9
2.2.3 Deadband 10
2.2.4 Startup/Control Delay 10
2.2.5 Power-On PWM 10
2.2.6 Valve Setup 10
2.3 Valve Calibration 11
Factory Configuration
3.1 Spreader Configuration Menu 12
3.2 Pro-Series Configuration Menu 13
3.3 Loadcell Interfaces 13
3.3.1 Loadcell Calibration Procedure 14
3.3.2 Angle Sensor Calibration 15
3.3.3 Factors Store 15
3.4 PIN Number Change 16
User Options
4.1 User Options Menu 16
4.2 Set Date and Time 16
4.3 Contrast/Brightness 16
4.4 Customise 17
4.4.1 Units 17
4.4.2 Edit Product Names 17
4.4.3 Step Size 17
Technical Config Menu
5.1 Display Options 18
5.1.1 Speed Smoothing 18
5.1.2 Rate Lock On 18
5.1.3 Rate Smoothing 18
5.1.4 Off Target 18
5.2 Loadcell Correction 19
5.2.1 Correction Span 19
5.2.2 Min.Stat.Weight 19
5.2.3 Dynamic Time 19
5.2.4 Dynamic Weight 19
pg 3