5.3 OVERLOAD LOG
TECHNICAL CONFIG
3. OVERLOAD LOG
In situations when the machine is loaded more than the maximum weight stored in the Spreader
Config menu a recording will be made in the overload log.
5.4 PRINT CAL DATA
TECHNICAL CONFIG
4. PRINT CAL DATA
It is always a good idea to keep a record of calibration data either in the back of the manual. or as
a print out. Connect the print to the upper serial point. Ensure first the the port has been
configured for a printer (see ports setup page 29)
Selecting the “PRINT CAL DATA” menu function immediately sends the data to the serial port. The
message “PRINTER BUSY” will be displayed while the data transfer is taking place.
If the bar on the screen stops filling up part way, the instrument cannot communicate with the
printer. Check the connections.
5.5 PIN # CHANGE
The PIN number for the TECHNICAL CONFIG menu can be set to prevent unauthorised users
from accessing the TECHNICAL CONFIG menu and potentailly interfering with the instruments
calibration settings.
TECHNICAL CONFIG
5. PIN # CHANGE
Follow the on screen instructions to change the PIN #.
If you forgot your personalised PIn number you will need to contact Roesner Pty Ltd or RDS for
instructions on reseting the PIN.
pg 20