background image

 

WARRANTY 

 
Mars’ warranty coverage, period, extent,  and 
limitations apply to the product only. It does not apply 
to labor. Mars warrants that Mars product 1) Is free 
from defects in materials and workmanship and 2) 
Conforms to Mars’ published specifications.  The 
warranty period for Mars WMI and WMH product is a 
twelve (12) month period commencing on its date of 
shipment. The date on customer’s invoice is the date 
of shipment unless Mars or your reseller informs you 
and Mars otherwise. Mars will provide free 
replacement of any part that fails as a result of a 
defect in material or manufacturer’s workmanship. 
Changes in operational specification parameters that 
are different from those provided on the  original 
purchase order are not covered.  Mars product is 
inspected and tested before packaging and is 
shipped in working condition. The warranty for Mars 
product only covers free-of-charge replacement of 
failed parts. The warranty does not cover labor and 
transportation expenses that may be required to 
provide and to install replacement parts. Because in 
many instances, it is impossible to determine the 
cause of failure, customer may be responsible for 
transportation charges associated with replacement 
of failed part. Mars does not warrant uninterrupted or 
error-free operation of Mars product.  Under no 
circumstance is Mars liable for any of the following: 
1) Third-party claims against you for damages; or 2) 
Special, incidental, or indirect damages or for any 
economic consequential damages (including lost 
profits and savings), even if Mars, its suppliers, or its 
reseller is informed of their possibility. The warranty 
does not cover repair or exchange of Mars product 
resulting from misuse, accident, modification, 
unsuitable physical or operating environment, 
improper maintenance and installation by customer, 
or failure caused by a product for which Mars is not 
responsible. The warranty does not cover damages 
caused by mishandling during transportation.  The 
warranty is voided by removal or alteration of Mars 
product or parts identification labels, by improper 
installation of product, and resulting non-compliance 
to federal, state,  and local codes and regulations. 
Additionally, Mars reserves the right to void the 
warranty for non-payment of invoice. 

 
CONTACT FACTORY FOR COMPLETE PARTS 
LIST FOR ALL MODELS. 
 
KEEP THIS MANUAL FOR YOUR RECORDS. 

Model Number: ______________________________ 

Serial Number: ______________________________ 

Date Purchased:  ____________________________ 

Dealer Purchased From: ______________________ 

 

 

 

 

14716 S. Broadway St., Gardena, CA 90248 

(310) 532–

1555 ● 

(800) 421-1266 

Fax: (310) 324-3030 

Please go to our website at 

www.marsair.com

 for a 

downloadable version of this document. 

Summary of Contents for Wind Stopping 16 Series




























Reviews: