background image

7

Safety 

Precautions

Page 7

 

1.

Transport of equipment containing flammable refrigerants

:

See transport regulations

.

2.

Marking of equipment using signs

:

See local regulations

.

3.

Disposal of equipment using flammable refrigerants

:

See national regulations.

4.

Storage of equipment/appliances

:

The storage of equipment should be in accordance with the manufacturer's instructions.

5.

Storage of packed (unsold) equipment

:

Storage package protection should be constructed such that mechanical damage to the equipment

 

inside the package will not cause a leak of the refrigerant charge. The maximum number of pieces of

 

equipment permitted to be stored together will be determined by local regulations.

6.

Information on servicing

:

1)

Checks to the area

:

Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary to
ensure that the risk of ignition is 

minimized

. For repair to the refrigerating system, the following

precautions shall be complied with prior to conducting work on the system.

2)

Work procedure

:

Work shall be undertaken under a controlled procedure so as to 

minimize

 the risk of a flammable gas

or

 

vapor being present while the work is being performed.

3)

General work area

:

All maintenance staff and others working in the local area shall be instructed on the nature of work
being carried out. Work in confined spaces shall be avoided. The area around the workspace shall be
sectioned off. Ensure that the conditions within the area have been made safe by control of flammable
material.

4)

Checking for presence of refrigerant

:

Explanation of symbols displayed on the unit(For the unit adopts R32 Refrigerant only):

WARNING

CAUTION

CAUTION

CAUTION

This symbol shows that this appliance used a flammable refrigerant. If the refrigerant 

is leaked and exposed to an external ignition source, there is a risk of fire.

This symbol shows that the operation manual should be read carefully.

This symbol shows that service personnel should be handling this equipment 

with reference to the installation manual.
This symbol shows that information is available such as the operating manual or 

installation manual.

            Caution: Risk of fire/

            flammable materials

(Required for R32 units only)

Summary of Contents for PS-101B

























Reviews: