4
5
Product Structure
LCD
Set Button
Shutter Release Interface
USB Interface (Connect
to camera / Charge)
Menu Button
Power Button
Operation
Charge
You could charge from a power source or from your camera.
[Recommended]
Charge while the GPS is turned off (non-working
mode):
1. Connect the GPS receiver to a power source with supplied USB cable or to
your camera with the N1/N3 cable.
2. Short press the power button to enter charging mode. The LCD screen will
show “Charging...” and the battery icon
will flash. When the GPS receiver
has been fully charged (usually takes 4 hours) , the LCD screen will show
“Charge finished” and the icon
will stop flashing.
3. Unplug the cable and restart the GPS unit. Now it’s ready to geotag photos.
Tips: For successful charging, please do not long press the power
button, otherwise it will enter the working mode.
Charge while the GPS is turned on (working mode):
1. Enter submenu of the unit -->select “Set charge mode?” --> select “On?”
-->”Charge enable”
2. Connect the GPS receiver to a power source with the supplied USB cable or to
your camera with the N1/N3 cable.
Button Definition
Power Button: Turns the GPS unit on / off and scrolls forward through pages.
Menu Button: Scrolls backward through pages.
Set Button: Enters the current setting option and confirms setting.
