16
17
4. Holding the receiver in your hand, rotate both devices slowly around the
X-axis and Y-axis (as the picture shows).
5. Do the rotation 2-3 times until LCD shows "Calibrating...V."
Then rotate the device slowly around Z-axis (as the picture shows).
6. Do the rotation 2-3 times until LCD shows "Cal successfully."
Please note:
• Try to do the rotation at a constant speed. Each rotation takes about
5-10 seconds.
• If calibration times out (LCD shows “Cal. time out”), please try again and
keep horizontal or vertical as far as possible.
• Calibration may not be possible under the following conditions because
the digital compass uses geomagnetism: at high altitudes, near magnetic
fields, in steel-structure buildings, or underground. Even if calibration is
possible, the receiver may not be able to detect the shooting direction
correctly.
Warranty
Marrex Technology Co., provides a one-year warranty under normal use and
lifelong paid maintenance from the date you purchase this product.
Marrex Technology will repair or replace the product under warranty for free
during the one-year valid period, but customers should pay for shipping and
insurance charges for returning the product to Marrex Technology.
This warranty only applies where a defect has arisen, wholly or substantially,
as a result of faulty manufacture, parts or workmanship during the warranty
period.
