LOG PLACEMENT - LOGF36
PARTS LIST
STEP 1: Place log #1 onto rear log holder and
center.
STEP 2: Place log #2 onto left side of log. Place log #3
onto right side of log #1.
STEP 3: Locate 2 holes on the bottom of logs #4 and #5.
Position them onto left and right log placement tabs.
STEP 4: Locate the hole on the bottom of log #6. Place
onto the mounting tab on log #2. Locate the 2 holes on the
bottom of log #7. Place onto mounting tabs on log #5.
STEP 5: Place glowing embers on the front of the burner
tube and ember plates. Place lava rock and vermiculite on
the burner pan as shown.
DO NOT PLACE LAVA ROCK AND VERMICULITE ON
BURNER TUBE.
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
50
