background image

WELCOME TO THE SPA LIFE!

Please enjoy your new Marquis spa, but think “Safety First”.  Read your Owner’s Manual

in its entirety before installing your spa and encourage all spa users to do the same.

More than just common sense, this Owner’s Manual provides vital safety and operational

information.

Every effort has been made to ensure the accuracy of this manual. However, Marquis

Spas reserves the right to improve its product without notice.  This could create a minor

variation between this manual and the actual product you receive.  We apologize for any

inconvenience this may cause.

SERIAL NUMBER LOCATION

On your spa, the serial number is engraved directly above the filter canister area.  On

models listed by Underwriters Laboratories, you will also find the serial number on the

tag in the equipment area.

PLEASE FILL OUT AND KEEP FOR FUTURE REFERENCE

__________________________________________________________________________

Name of Purchaser

Date of Purchase

__________________________________________________________________________

Address

_________________________________________________________________________

City

State

Zip Code

__________________________________________________________________________

Signature

Telephone

_________________________________________________________________________

Spa Model / Series / Color

Spa Serial #

Pack Serial #

__________________________________________________________________________

Retailer’s Name

_________________________________________________________________________

Retailer’s Address

Telephone

__________________________________________________________________________

City

State

Zip Code

We sincerely hope your spa life is a pleasant experience.  If problems should arise, contact

your Marquis retailer.  Or contact Marquis Corp. by using one of the methods below.

596 Hoffman Road, Independence, OR 97351

Voice: (503)838.0888 (800)275.0888

e-mail: [email protected] • www.marquisspas.com

Copyright Marquis Corp. 1/2001 • 710-0812

O W N E R ’ S   M A N U A L

M A R Q U I S   S P A S   •   R E L A X I N G   Y O U R   W O R L D

marquis spas

®

Summary of Contents for Coastal Destiny







































































Reviews: