5
Setup
Note:
Items not listed under the
are sold separately.
Power Information
Before connecting the fixture to a power outlet, make sure the power cable is not crimped or
damaged. Also, make sure the power outlet’s voltage is within the range stated on this product (on
its housing or decal).
Before
cleaning or replacing the fuse,
disconnect Gesture Beam 500 from its power source
. Use
a screwdriver or other tool to remove the compartment (do
not
pull it out by the tab only). Replace
the fuse only with a new fuse with the same rating (
250 V
,
4 A
).
Mounting
/
Rigging
Standing
Place the fixture on a flat, stable surface. Make sure all cables are secured and placed so that no one
will trip over them.
Suspended
1
3
4
5
2
Clamp
(not included)
Hanging Bracket
1
/
4-turn
1
/
4-turn
Optional:
Follow these steps
to use the hanging bracket(s)
(included) for mounting the
fixture to a truss.
(
tighten until
secure
)
