•
Make sure the sensors on the end cap are in good condition and clean.
•
Connect the sensor to a charger and check the charging status.
•
Switch on the sensor by shorting the center lug to the negative lug, then listen for
a ping noise and check if you see the LED switched on.
•
Test the sensor measures with Mosa2: depth, temperature, pitch, roll, and if
applicable: spread distance, echogram, catch status, speed measures (using the
EM log tester).
•
If you have a test hydrophone, check the reception in the wheelhouse with Scala.
XXL bottle
| V1 | Maintenance Checklist
10
Summary of Contents for Pro Trident XXL bottle
Page 1: ......
