Marmitek Mini Timer MT20, User Manual

Page: 16 / 112

Setting the Alarm Buzzer
With the “Wake” switch in the “ON” position, any program you set for
Module number 1 will also set the internal alarm buzzer.
© MARMITEK 16
t
will
A bell icon will show in the display to indicate that a time for the Buzzer is
set.
For example: If you connect your bedside lamp to a Lamp Module set to Unit
Code 1 and then program Module number 1 for an On time of 7:00 AM - A
7:00 AM your bedside lamp will turn on and the internal buzzer in the Mini Timer
sound. You can turn the buzzer off (when you wake up) by sliding the Buzzer switch
to the OFF position. You can turn off your bedside lamp by pressing the OFF button
for Module 1. You can leave the Buzzer switch in the OFF position if you don’t want
to use the wake up feature. This will not affect any programs you have entered for
Module 1.
Alternatively, if the Buzzer switch is OFF and you place the Mode switch in the Clock
Set position, you will “suspend” both the buzzer AND any times you have set for
Module 1. This is useful to suspend the wake-up function on weekends. See
To
Cancel/Snooze the wake-up alarm.
The backlight and the buzzer do not operate when the unit is running on the
backup batteries.
To Cancel/Snooze the wake-up alarm
When the alarm sounds at the time you have set, you can cancel it in one of two
ways:
1. Slide the Wake switch to the OFF position. This will cancel the alarm
permanently. Slide the switch back to “ON” if you want the alarm to wake you up the
next morning.
2. Press any key. This will give the “snooze” feature. Pressing any key while the
buzzer is sounding will turn the buzzer off and will automatically turn it back on in 10
minutes time. You can do this indefinitely.
The buzzer will automatically turn off, and stay off, after 10 minutes if you ignore it.
Any Module(s) you have installed and set to Unit Code 1 will turn On when the buzzer
sounds and will stay On after you turn the Buzzer switch to OFF or cancel buzzer
using the snooze feature. You will need to press the OFF button for number 1 to turn
the Module(s) off. Alternatively, you could program it/them to turn off later.
Suspending the wake up function
If you set channel 1 for an On time of 7:00 AM and number 1 is your bedside lamp, at
7:00 AM
every day , your bedside lamp will turn on and the internal buzzer will
sound. If you turn the Buzzer switch off on Friday nights the buzzer will not wake you
up the next morning but your bedside lamp will still turn on.