INSTALLATION INSTRUCTIONS
This heater operates in upright position only. For mount-
ing heater to desk, apply velcro to top of heater back, one
piece near each corner. Remove backing from back of
velcro and press firmly against the desired position on the
desk. Normal position is against the desk knee-well panel
with the top of the heater at knee height. To remove, pull
bottom of heater firmly away from desk. Heater can be
restored to original position by once again attaching to
velcro. The leg on the back swings out to support the
heater when used as a portable heater.
OPERATING INSTRUCTIONS
1. Heaters are provided with flexible cord with a grounded 2
blade plug (as shown in Figure 1) and built-in ON/OFF
switch. This heater is for use at 120 V AC only.
2. An adapter as shown at C in Figure 1 is available for con-
necting three-blade grounding-type plugs to two-slot recepta-
cles. The green grounding plug extending from the adapter
must be connected to a permanent ground such as a proper-
ly grounded outlet box. The adapter should not be used if a
three-slot grounded receptacle is available.
3. Occasionally a new heater will emit a slight “new smell” odor
during initial use. This smell should dissipate within the first
hour of use.
4. Always unplug heater when not in use. When heaters are
not to be used for an extended period of time, cord should
be coiled and tied to prevent damage and heater should be
stored in a safe location.
MAINTENANCE INSTRUCTIONS
1. If heater fails to operate or if heater or power cord becomes
damaged, unplug and discontinue use. DO NOT attempt to
repair the heater. There are no user-serviceable parts
inside.
2. If the heater fails during the warranty period, return to place
of purchase or to the factory as outlined in the LIMITED
WARRANTY statement below.
3. Heater may be cleaned using a damp cloth or sponge and a
mild detergent. Never submerge or soak heater in water.
Always turn heater off and unplug before cleaning. Heaters
may be repainted if desired. Use only high temperature
water based acrylic paints.
2
12/11
Part No. 5200-2184-006
ECR 39312
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except
heating elements which are warranted against defects in workmanship and materials for five years from date of installation. This warranty does not apply to damage from
accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or
maintained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products
to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service cen-
ter or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that
such repair or replacement is the exclusive remedy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM
THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE
PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from state to state.
For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the fac-
tory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization,
include all catalog numbers shown on the products.
HOW TO OBTAIN WARRANTY SERVICE AND
WARRANTY PARTS PLUS GENERAL INFORMATION
1. Warranty Service or Parts
1-800-642-4328
2. Purchase Replacement Parts
1-800-654-3545
3. General Product Information
www.marleymep.com
Note:
When obtaining service always have the following:
1. Model number of the product
2. Date of manufacture
3. Part number or description
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
Figure 1
